JetFilter System

David Gentry Inventor and President of the Jetfilter System came to Charleston, South Carolina last week. He had booth at the PDCA Conference. David is on the right and  Roy Myers on the left. The Jet Filter releives hydrostatic pressure on almost any wall design ( composite, concrete, vinyl, aluminum, wood or steel).

 There are two types of the JetFilter System. The original wick drainage system is made of a plastic with UV Protection and now  there is a Steel version.   They both operate the same way . These weep holes have an easy way to clean the filter periodically. The purpose to relieve the pressure from behind the walls .  Jetfilter System brings  longevity to your investment. www.jetfiltersystem.com. David Gentry can be reached at 239-825-4508.

David just released the Steel version last week. We have a special Thanks to Myrick Marine Construction.in Savannah Georgia. They are going to use them on job in the Savannah area. Myrick Marine Construction phone number is 912-964-0711.

Gateway Marina In Hypoluxo Florida

gatewaymarina.net

Gateway Marina did a complete renovation 3 years ago.  Chris Ciasulli wanted to use fiberglass composite pilings.  Chris and Southeast Marine Construction decided to use Harbor Technology Composite Pilings.

Chris should not have to replace these pilings for 50 plus years .  Harbor Technology piles come in lengths up to 100+ feet without any splices,  various wall thickness, and variety of colors. Harbor Tech Composite Piles will not  rot, no bores, no crumbling nor rusting.

Gateway Marine has :

In/out storage. 

Fuel Dock and Ship store

Close to Boynton Inlet

Courtesy Shuttle to The Dock

  

Address:

8250 S. Federal Hwy

Hypoluxo, Fl.  33462

561-588-1211

Southeast Marine Construction address  is:

404 NE 38th Street

Oakland Park, Fl.  33334

954-630-2300

southeastmarineconstruction.com 

  Many Thanks to Gateway Marina and Southeast Marine Construction.

 

BMI's. ThruFlow project on Pine Island

BMI.in Cape Coral  Florida  built a dock on Pine Island Florida..  It was a beautiful location called Porpoise Point.  The dock is for a condo association.  ThruFlow is perfect for docks because of the no maintenance, very barefoot friendly  and .ADA compliant.  ThruFlow will also help with storm surge.

Thanks to BMI for using ThruFlow and doing a terrific job!  BMI's address and phone number:

813 SE 47th Street
Cape Coral, Fl.  33904
239-542-0456

BMI purchased the ThruFlow from Shoreline Lumber in Fort Myers.  I am sure Ron Paluck would be glad to help you with ThruFlow. Shoreline Lumbers phone number is 239-463-6857.

Jet Filter System

Advanced Waterfront Technologies , Inc. is now representing Jet Filter.  The purpose of the JetFilter is to relieve the hydrostatic pressure from behind the seawall .  These weep holes are designed for use on both new and existing seawalls, retaining walls and bulkhead walls.

JetFilter uses UV  protected material  and is available in 4 colors. Soon to be released is a steel version of the JetFilter.

Please see additional information at www.jetfiltersystem.com.

Florida Dock & Marine Expo By the FMCA

www.myfmca.org

The FMCA had their Dock and Marine Expo last weekend in Orlando. In the picture above is the President, John Loftis of  Loftis Marine Division Inc. in Pensacola Florida. www.loftismarine.com.  

The FMCA is an non-profit organization for contractors, associates and professionals working in the marine industry.  The goal is to improve marine construction. The marine contractors must be licensed and be insured professional marine builders.

This year the expo was at the  Hilton in the Walt Disney World Resort. Meg Slentz Nagy at Meetings To Order did a great job of getting everything organized. She always does a great job with the food. Meg's web site is www. meetingstoorder.com. There were a lot of new vendors and it was good to see contractors participate. The expo is a good networking tool. Besides learning  something new every time I go, it is fun time.   

Thru Flow and The Canine Ranch

www.thecanineranch.com

Chris McLeod at The Canine Ranch wanted something other than wood for ramps for her furry friends.  ThruFlow worked perfectly for her application.  It was another fun use of Thruflow grated decking.  Chris should not be replacing her ramps like she was having to do with wood. Chris,  Thanks for using ThruFlow and sharing your pictures.

Harbor Technology and ASCE Ports 2010 Conference

www.harbortech.us

Alan Potts and Erik Grimnes hosted a booth in Jacksonville for the ASCE Ports Conference . I was glad to have them come to Florida and conference seemed to very successful !!

Harbor Technology displayed their composite piling line and composite bridge beams. Harbor Technology is located in Maine . Harbor Technology utilizes University of Maine's AEWC lab for their testing.

Harbor Technology  has manufactured composite pilings all the way to 36" diameter  to 103 feet in length without any splices. Also a HDPE sleeve can also put on the composite piling for extra protection..

Advantages of Composite Piles:
Light weight
High strength-to-weight ratio
Directional strength
Corrosion & weather resistance
Dimensional stability
Low thermal conductivity
Low coefficient of thermal expansion
Non-Magnetic
High impact strength
Low maintenance
Long term durability
Tailored surface finish

Special Thanks for Harbor Technology for coming to Florida.

Ferreira Construction and Stuart Boardwalk with Harbor Tech Composites Pilings

www.ferreiraconstruction.com

Ferreira Construction in Stuart Florida  added to the Stuart Boardwalk.  They used Harbor Technology  Composite pilings.  It was my first Harbor Tech Composite piling job in Stuart Florida.  Since I live in Stuart, I give a very  special Thanks to Ferreira Construction.  The piles were driven with impact hammer and went in very smoothly.  One of guys said they were alot easier to carry than treated lumber piles

It will be an added benefit for the City of Stuart because they should last 40 plus years. No chemicals to leach in the water, no rust, no bore problem, no cracking..  In the long run it should save the city money.

Ferriera Construction does commercial and residential marine construction. They do docks, piers, breakwaters, dredging, shore hardening, shoreline development, bridges and FDOT work.  Their phone number is 772-286-5123.

Harbor Technologies  web site is www.harbortech.us.  Thanks to them for manufacturing a long lasting durable pile in any size and length without splices

Redfish Marine Construction ThruFlow in Destin

RedFish Marine Construction just finished a boardwalk from Destin Beach to a Condo.  It looked BEAUTIFUL.  I thought this is great for Condos on the beach because ThruFlow doesn't get hot . This is especially nice since  the sand can really get hot.

Another plus is with the anti slip surface. Sand would be knocked off your feet so that it would not be tracked onto other surfaces. Also the Thru Flow grated panels would help with this also.

Another feature for the condo is no maintenance.  They  should be enjoying their new walkway for many, many years.

RedFish Marine Construction is located in Santa Rosa Beach, Florida.  There phone number is 850-622-3272.  Their web site is WWW. Redfishmarine.com.  They would be glad to help you and do a terrific job.

For more additional info on ThruFlow  go to www. ThruFlow.com

ThruFlow Booth at the IMBC Conference in Tampa

Derek McGivern, General Manager of ThruFlow Corporation, had a booth at the IMBC Conference in Tampa  this past week.  I have been selling ThruFlow for 4 years now and  have enjoyed every minuet of it.  It is truly a premium decking. It does cost more than wood but last probably 3 to 4 times longer with a lot advantages. There is no maintenance, does not get hot, helps with storm surge, has  UV inhibitors. There  is 12 year 100% warranty.




Here is Derek with Chris Way,President, and Bill Adams, Sales Manager,  from No Profile Boatlifts. No Profile manufactures premium  boat lifts. Check out their web site at www.noprofileboatlifts.com.
No Profile is using ThruFlow on some of their lifts. We were told it was going to be a standard for their 30,000 lb boat lift.  We can't wait to see the pictures of one being installed in Texas!!





IMBC show was hard work but fun. It was good to see old friends and make new ones.  Derek got out of the cold weather from Canada.   I really Thank him for coming and having a booth.